gen2hemi
former ASE knuckle buster
- Joined
- Mar 15, 2010
- Messages
- 63
- Reaction score
- 1
76 360 (Dart) K Frame and complete disc brake front suspension
The K Frame, upper and lower A arms parts have been disassembled and prepared for a quality restoration as follows:
I left the K frame welds and a slight bottom scrape as-is. It is a very sound and straight V-8 K Frame, but if you want to weld it up and dress everything smooth with a flap disc this would be an excellent piece to start with too.
I also have all the parts I consider cores to go with this and it is up to the buyer how much of it you want depending on shipping. I will suitably pack and ship any or all of the following as the buyer wishes:
All you need to have a ready to run front end is a bushing and ball joint kit from PST, Just Suspension, Mancini, etc!!
$450 + shipping
inquire PM or [email protected]
The K Frame, upper and lower A arms parts have been disassembled and prepared for a quality restoration as follows:
- Cold tanked and pressure washed to completely degrease
- Media blasted with #80 Vitrogrit (recycled glass) to completely clean metal
- Epoxy gray primer
- Eastwood Chassis Black medium gloss
I left the K frame welds and a slight bottom scrape as-is. It is a very sound and straight V-8 K Frame, but if you want to weld it up and dress everything smooth with a flap disc this would be an excellent piece to start with too.
I also have all the parts I consider cores to go with this and it is up to the buyer how much of it you want depending on shipping. I will suitably pack and ship any or all of the following as the buyer wishes:
- Disc brake rotors
- Calipers
- Power steering box and pitman arm
- Torsion bars
- Strut rods
- Bolts brackets and hardware
All you need to have a ready to run front end is a bushing and ball joint kit from PST, Just Suspension, Mancini, etc!!
$450 + shipping
inquire PM or [email protected]
