A833 to a 3 speed bell housing.

[circlepilot]

Tried to research it, didn't find the answer I needed. So here goes it...
I've got a 65 Barracuda 273 factory 3 speed on the column, that was crudely converted to a floor shifter. I'm looking at an A833 out of a 65 Dart. Will it bolt up to my bell housing?
Norm

 

[RustyRatRod]

Not unless the bellhousing has the dual bolt pattern. Some did.

 

[65 Dartman]

The earlier bellhousings were either for the 3 speed or the 833. The bellhousing RRR mentioned were used in the 70's. If that's not correct, someone will have the correct answer.

 

[DDodger]

Be wary of a bell out of a pickup? I don't know, asking. Some pickups / vans came with OD 833, "it might be" that they also used the larger size flywheel?

 

[AJ/FormS]

I'm pretty sure no.Unless you have an A230

The A903 and A745s were separate deals AFAI can recall.And the A903 BH was for a 9 inch clutch only, also AFAICR.

 

[circlepilot]

I'm pretty sure no.Unless you have an A230

The A903 and A745s were separate deals AFAI can recall.And the A903 BH was for a 9 inch clutch only, also AFAICR.

This is my Bell housing.

 

[d55dave]

833 4 spd will not bolt to that. It does not have the correct mounting bolt pattern.

 

[circlepilot]

Thanks.
I just now found a Mopar web site that gave me all the casting ID's. 2463413 (my bell housing) 9 1/2 clutch 3 speed, 64-66 A-Body.
According to the list, I need to find a 2465523 or 2465524 or a (maybe?) 2463411 casting.
Norm