[WANTED] A833 transmission shifter and linkage

[J-man]

Hi,

I have a 69 dart that was originally a manual, as it sits it is an automatic and I would like to convert it back. The only part I have at the moment is the pedal assembly I need everything else (bell, shifter, rods). Would prefer something that doesn't need a rebuild but am open to buying one that is especially if it has all of the related hardware.

Thank you for your time

 

[rklein383]

Brewers has all the stuff new.

 

[J-man]

thank you for the heads up the cost might be more then I'm willing to spend (waiting on passion 5 speed). To make matters worse the previous owner cut the main support that the cross member and the torsion bars bolt onto so it has to be replaced (would like to have a 4 or 5 speed in so everything gets proper clearances), between that and just being tired of waiting I want to go with a 4 speed for now so I can drive the car until the 5 speed comes in.

 

[Dfr360cuda]

Pm on the way

 

[gary hill]

thank you for the heads up the cost might be more then I'm willing to spend (waiting on passion 5 speed). To make matters worse the previous owner cut the main support that the cross member and the torsion bars bolt onto so it has to be replaced (would like to have a 4 or 5 speed in so everything gets proper clearances), between that and just being tired of waiting I want to go with a 4 speed for now so I can drive the car until the 5 speed comes in.

Did you get the pics I sent you

 

[pomonamissel]

got stuff , two people want no bucks , pm me .

 

[nwdart]

I have everything you need. Nwdart

 

[J-man]

Wow super quick response time around here! Gary I just checked my email I got the pics.

 

[gary hill]

Wow super quick response time around here! Gary I just checked my email I got the pics.

This transmission is a very nice unit it is very clean inside and out. Where do you need live

 

[pomonamissel]

well , i've got the rest if you got a trans lined up , peddles , bell w clutch set up , zbar and linkage , shifter with bracket and rods , fasteners . also have an early tranny w 2.66 first .

 

[nwdart]

Pics, I will also be racing in Bremerton May 5th and 6th

 

[Moparparts]

If you end up needing individual pieces i have a nice used fork and flywheel cover for a 10 1/2 small block and one for a 10 1/2 Big block bell, PM me