After Two Years on the Shelf, I Forget What These '65 Formula S Parts Belong?

[dibbons]

Upon disassembly, it seemed every nut and bolt was permanently ingrained in the memory-not so (I was delusional at the time).

First foto is some funny rubber bumpers, do they attach to the trunk lid or where?

Second are two bolts and two funny clips. They are unique and should be obvious, but I don't know about them either.

Thank you.

 

[Hyper_pak]

Can't help on all the parts, but do the star washers lock the hood hinges to the posts behind the fenders?

 

[Dana67Dart]

Speed nuts / one-way washers in photo 2 might be trunk hinge pivot shaft retainers.

Rubber parts in photo 1 might be hood alignment bumpers (I recently heard that early As had trunk alignment bumpers as well, don't know if that is correct)

 

[65 Dartman]

I can’t swear to use on a Barracuda, but on my wagon bumpers very similar to what’s pictured mount on the side of the quarter panel right below the side crease.

 

[dibbons]

On another thread just posted, looking for the location of these parts. Maybe the washers in the second foto are the hood hinge "holders", the screws in the lower foto (that I found in the same plastic bag as the washers) are still a mystery.

How Does One Replace the Hood Springs/Hood on '65?

 

[brian6pac]

Top pic trim 64 65 barracuda trunk hinge trim.

 

[dibbons]

I just found a factory Chrysler Parts Catalog in a storage box and this is what I found:
rubber items called rear bumper "stabilizer"
Part number Valiant 2266 525 (2)
Part number Dart 2266 547 (2)
Part number Dart Station Wagon 2266 525 (2)
Part number nut w/retainer 6000 123 (2)
Part number screw, shoulder 6023 977