Mr.FT Well-Known Member Joined Feb 14, 2011 Messages 864 Reaction score 45 Location New Jersey Rating - 100% 12 0 0 Sep 21, 2014 #1 Contact seller Hi, I'm looking for a couple studs that hold the air cleaner to the carb. These will be for a 72 340 with the stock air cleaner. PM if you have any you want to sell. Thanks Tom
Hi, I'm looking for a couple studs that hold the air cleaner to the carb. These will be for a 72 340 with the stock air cleaner. PM if you have any you want to sell. Thanks Tom
jefflock 69 Dart 408 10.08 best pass so far FABO Gold Member Joined May 18, 2006 Messages 3,515 Reaction score 110 Location Kansas Rating - 100% 20 0 0 Sep 21, 2014 #2 Go to your local hardware store and buy a piece of 1/4" all thread. Cut it to length and then you have one.
Go to your local hardware store and buy a piece of 1/4" all thread. Cut it to length and then you have one.
bear Well-Known Member Joined Aug 26, 2013 Messages 395 Reaction score 30 Location mass Rating - 50% 1 1 0 Sep 23, 2014 #3 jefflock said: Go to your local hardware store and buy a piece of 1/4" all thread. Cut it to length and then you have one. Click to expand... I was thinking the same thing .
jefflock said: Go to your local hardware store and buy a piece of 1/4" all thread. Cut it to length and then you have one. Click to expand... I was thinking the same thing .
66fs FABO Gold Member FABO Gold Member Joined Sep 9, 2009 Messages 9,102 Reaction score 4,408 Location Greenwood, South Carolina Rating - 100% 54 0 0 Sep 23, 2014 #4 I use brass all thread and use blue locktite to seal it and prevent it from coming out of the carb threads.
I use brass all thread and use blue locktite to seal it and prevent it from coming out of the carb threads.
