Air conditioner re-install what condenser

-
furz4

furz4

Well-Known Member
Joined
Oct 18, 2007
Messages
450
Reaction score
58
Location
Marion, Iowa
I am re-installing the AC in my Dart, I am going with the original evaporator, sanden compressor, expansion valve, and new hoses. Unfortunately my original condenser is damaged and I was thinking of going with a newer style parallel flow unit. I am wondering what size would be appropriate to replace the original 23"x16" unit and what others have used that worked well.
 
That's kinda what I was thinking, something around original size that I could use the same mounting holes. R134 isn't quite as efficiant and I will have an expansion valve to help with any potential mismatch
 
On my 66 I did a Vintage air condensing unit. Worked well but had to use custom lines in and out.

Go as big as you want but if there is sheet metal behind it- it is wasted space. Size it to your opening.
 
Don't just dive into anything give it some thought. With some engineering you can make anything work. Why clutter up the engine compartment? What if one day you need the room for more Cubic inches.

1688124335681.png





1688124358225.png


1688124469895.png
 
You must log in or register to reply here.
-

Back
Top