alignment specs

[downsr]

Any one have alignment specs for 1970 duster 340 car stock suspension.Also am confused where to take measurments for ride height.

 

[downsr]

Can any one help me with this .Doing alignment and ride height today.Thanks

 

[abodyjoe]

check the service manual for how and where to measure for ride height..

for alignment specs it depends if you are running bias ply or radial tires and what kind of driving you want to do.

 

[Daves69]

Here's some info for download........................
http://www.mymopar.com/index.php?pid=33

 

[6pk2goDemon]

This chart should help you...

 

[340GTSDart]

This chart should help you...

That's a handy chart to have. Are these specs for bias ply or radial tires?

 

[autoxcuda]

That's a handy chart to have. Are these specs for bias ply or radial tires?

Radial Tires

 

[AlV]

Any one have alignment specs for 1970 duster 340 car stock suspension.Also am confused where to take measurments for ride height.

Factory manual says measure from the pivot of the LCA to the ground (they presume you have level workplace) and the lowest part of the LCA (by the steering knuckle) to the ground.

Subtract the knuckle measurement from the pivot measurement and that is your ride height.

 

[downsr]

Are you meaning the pivot as where the torsion bar goes into the lca.The other measurement is
on the bottom of the lower ball joint

 

[abodyjoe]

Are you meaning the pivot as where the torsion bar goes into the lca.The other measurement is
on the bottom of the lower ball joint

check your service manual..


if you don't have one download it here.. ttp://www.abodyjoe.com/pictures/Misc.%20car%20info/70%20Dart%20Challenger%20Serv%20Man1.pdf