Any opinions on this camshaft?

[Cuda44061967]

http://www.summitracing.com/parts/HRS-721313-08/

My other parts include, edelbrock victor2954 intake, 440 ez indy as cast heads, 10.76:1 compression ratio .30 over 440

also have 2 inch cppa headers and will go with a 900 cfm or so holley 4150

 

[MRL Performance]

You will be right on the edge with pump gas, but a tight quench and the aluminum heads will help a lot. It will have a ton of low/mid range power. Nice cam.

But this Lunati cam http://www.lunatipower.com/CamSpecCard.aspx?partNumber=60332
will make more power over a broader rpm band