Mancini sells a drop base for 68/69 HP that clears .I am running an air gap but so far haven't found a drop base that ALSO clears my electric choke on the Edelbrock AVS carb I have ? I REALLY want to run the stock air cleaner but it has to fit right. What drop base are you guys using?? I think the stock air cleaner just looks "right" it just doesn't clear the hood!!!
View attachment 1715879217
I have a magnum (360) 408 with an air gap and using the original non-silenced air cleaner. No issues with either the Holley 750 or Edelbrock 650 AVS2.Any one running the air gap intake.
On there abody small block pics
How is hood clearance.
View attachment 1715878619
I used to run an airgap then went to the Victor 340 and it made me forget the airgap!! It does everything the airgap did but with more top end.Not an air gap, but I have a Edelbrock Victor 340 intake on mine, which is also a high rise intake. I am running a stock '69 340 air cleaner, hood clearance is close but it fits.
View attachment 1715878686
I have a 69 Barracuda with a 340 and an Air Gap. Hood clearance was very tight, so I went with a drop base air cleaner and a 2" tall filter instead of the standard 3" one. I called K&N, and they said it would easily flow as much (or more) than a 3" paper filter.It's a bit tight but can easily be addressed with a drop base or thinner air cleaner. 65'
"Self clearancing" lolBarracuda with the Air Gap and factory base is a little tight .
View attachment 1715878688