Are there any books on doing a GenIII Hemi Swap into an old Mopar

[challengergary]

I have a customer that wants me to swap his 360 for a 5.7 Hemi he picked up. He wants it as down and dirty as possible. Are there any books out there that give a play by play?

He is undecided on whether to leave it fuel injected or to go carbed. Advice?

Also, he is thinking about leaving his 727 as the trans. Any problems hooking that up to the 5.7?

Also, how many hours does something like this take? I have done a bunch of regular small block to big block swaps but never one of these...

 

[jeffneal66]

Most of this stuff ia available on this forum. Just look through the Gen 3 HEMI section (where you put this). You might also call Inertia Motorsports.

 

[Cevidicus]

There are no swap book out yet. None that I know of anyway. There is a book about the new hemi out, but, it has nothing at all about swaps. Just general info and late model mods. Some of the info varies from page to page and has nothing specific like torque specs etc.


Read through this thread and follow the links. You will learn alot.
http://www.forabodiesonly.com/mopar/showthread.php?t=89134