b block stuff, new and used

[turbofreek]

I've got a 76 400 complete 450

New billet distributor for b block in box from 440 source thought in October. 100 shipped

Fabricated valve covers from 440source new in box for big blocks 170 shipped.

M1 single plane intake for b block currently being modified for efi and is half way done. With fuel rails and hardware. Completed by next week. 275 for everything.



Hemi parts considered for trade

 

[turbofreek]

Ttt

 

[turbofreek]

Ttt

Also have shumacher bbm to /6 k with solid billet pads included with the rubber ones. Will separate. Make offer.

 

[Valiant Steve]

I could be interested in the mounts are they for an A body 1969 BB on a slant six K member ? how much for all the mounts I don't like making offers so hows $20.00 sound, Please just tell how much you need to get for them shipped to 14305 by USPS Parcel Post as this is by far the cheapest way to ship, Please let me know

Thanks Steve.

 

[turbofreek]

I'll do 50+ the ride. Or just sixty total. I figure the rides about 12 for usps, weight being the factor.



Also have 7qt deep sump bb pan that is new, but slight quarter size dent on bottom of sump. Very usable still. It was from resting on the steering link below it while mocking up engine.

 

[4fortyDemon]

If the mounts aren't sold - I'll buy them now! let me know please.

 

[turbofreek]

Motor price is 250 not 450. Don't know how that was priced like that.


For anyone with distance to the east. I'm heading to peoria Illinois July 4 weekend and can bring stuff to help cost or eliminate shipping if you will be in that area or close to it.

Have efi rails for bbm new with hardware will fit any efi based intake for a wedge. They are edelbrock rails.

Negotiatable on most of this stuff. It will just sit and collect dust or hit a trash can a year or two down the road. I have no use for these things anymore.

 

[inkjunkie]

I might be interested in the m-1 intake, could you post some pictures of it when it is done?

 

[turbofreek]

I might be interested in the m-1 intake, could you post some pictures of it when it is done?

I haven't even thought about finishing the intake. Honestly. It has the holes drilled and the bungs are mostly cemented in. However it needs more filling of the bungs and grinding off all the extra bungs sticking throught the runners. It maybe just scrap at this point to me. If it is something you think you would like to take on to finish yourself? I'll damn near give it away if somebody buys the rails and if they cover the shipping. How does that sound?

 

[72demon440]

can I get some pics of the valve covers! Jared

 

[72demon440]

also pics of the 7 qt pan and How much for it? thanks again, Jared

 

[turbofreek]

I can text or send pics VIA email. I'm to sick at the moment to load it all up on my computer today.

 

[inkjunkie]

I haven't even thought about finishing the intake. Honestly. It has the holes drilled and the bungs are mostly cemented in. However it needs more filling of the bungs and grinding off all the extra bungs sticking throught the runners. It maybe just scrap at this point to me. If it is something you think you would like to take on to finish yourself? I'll damn near give it away if somebody buys the rails and if they cover the shipping. How does that sound?

What would you take foe the manifold/rails shipped to 99013? Was this the intake you posted on the turbo forums?

 

[turbofreek]

I can text or send pics VIA email. I'm to busy at the moment to load it all up on my computer today.

 

[turbofreek]

What would you take foe the manifold/rails shipped to 99013? Was this the intake you posted on the turbo forums?

yes it was and I haven't done much with it. I drilled the holes and epoxied both sides in. Then one side decided to not hold onto one of the bungs. If I remember that correctly? Would not be hard to finish if time is what one has. I am not the guy with Much free time. So it has sat. And I cant keep a satisfactory engine for me and keep changing my mind. Id say 150+ the ride for it all sound fair? It's over 20 to ship with the size of it, can split the cost with you. The rails are somewhere in the 80-120 range.

 

[turbofreek]

also pics of the 7 qt pan and How much for it? thanks again, Jared

50+ the ride for the pan. If you have an email or number to text a pic I can send it to.

I also have a 1/2" pick up for the pan and a windage tray for a stroker application as well. All these are new and in packages still. Except the big stuff didn't come in a box. It was all shipped together in one huge box together.

Have new mini starter to go as well 100+ the ride.

 

[KP]

Would like to see pictures of the m-1 intake

 

[inkjunkie]

yes it was and I haven't done much with it. I drilled the holes and epoxied both sides in. Then one side decided to not hold onto one of the bungs. If I remember that correctly? Would not be hard to finish if time is what one has. I am not the guy with Much free time. So it has sat. And I cant keep a satisfactory engine for me and keep changing my mind. Id say 150+ the ride for it all sound fair? It's over 20 to ship with the size of it, can split the cost with you. The rails are somewhere in the 80-120 range.

If some one else comes along don't hold it for me, but I am intersted, just no spare cash right now....

 

[turbofreek]

Guys I'm trying to get pics up. Just haven't got a quick and easy way to do so.

Post an email and ill send them that way ASAP.


Oh and I took pics of the intake and got a look at it. It's the two inner bungs on the same side that are needing reepoxied that had came loose. Some filling and standing around them all. As well as finishing up with painting over the rest and grinding down the bungs on the inside of the runners. If the price is thought to be to high then make offer. I just don't want to eat the large cost to ship it.

 

[turbofreek]

pics of most of some of the stuff asked for

 

[turbofreek]

i forgot i had a new mini starter as well, 100 and the ride.

9:30am-10pm central time.

if i didnt respond to an email or pm. im sorry im really busy most of the day. and the only time i get on the site is during phone viewing during lunch or while driving.


No phone #,s,use PM feature.See rules http://www.forabodiesonly.com/mopar/announcement.php?f=87&a=6

 

[turbofreek]

Wow 20 tire kicker, no buyers.

 

[Valiant Steve]

Hi could you give me a price on the following items or a package deal on what I'm after please :mounts, oil pan, water pump housing & pump if you have it, windage tray, pump pickup, that's what I'm after and maybe the valve covers if the price is right ok shipped to 14305 I'm sorry I haven't called you but I'm moving and my land line is not hooked up yet and the long distance charges on my cell are a killer, I am interested and will paypal you for the stuff if the price is right Thanks Steve. :thumrigh:

No phone #,s use PM feature.Read rules http://www.forabodiesonly.com/mopar/announcement.php?f=87&a=6

 

[4fortyDemon]

sent pm and payment for mounts,waterpump housing and mini starter- Check your pm!

 

[turbofreek]

ALL pms replied to.