B&m line lock help

[Trevor1991]

Im trying to install a b&m line lock on my 67 barracuda. Im installing it to lock the rear brakes out so i can still control front brakes while doing my burnout. My issue is im having a heck of a time trying to find the adapters to thread into the 1/8 npt threads on the line lock and also thread into standard 3\16 brake line. Which has 1/8 inverted flare fittings. I know i could use compression fittings but really dont want to cut the brake line at all.

 

[diymirage]

like this?

Wilwood Brake Line Fittings and Adapter 1/8" NPT Male-3/8-24" IF Female Straight

 

[67Dart273]

"A heck of a time?" NAPA/ O' Really?s SHOULD have them

These are known as "inverted flare" for the brake tubes, so they are a "pipe to inverted flare adapter" or "half union."

 

[Trevor1991]

"A heck of a time?" NAPA/ O' Really?s SHOULD have them

These are known as "inverted flare" for the brake tubes, so they are a "pipe to inverted flare adapter" or "half union."

Tried oreillys advance autozone and two hardware stores...no luck