Barracuda Hoods
- Thread starter randys4406
- Start date
-
- Status
There are pins that hold the inserts in place. I believe there is a recess area that the inserts set in also. Minor surface rust on bottom. PM for bottom side pictures.
Here are bottom side pics.
The first one is the 67
Here are bottom side pics.
The first one is the 67
1968FormulaS340
Well-Known Member
Not the best pic but they are recessed into the hood.
1968FormulaS340
Well-Known Member
Amazing what you can do with some Krylon Dull Aluminum, Krylon Semi-Gloss Black, Dupli-Color Graphite wheel paint and some tape.
Still look the same 4+ years later. Not bad for about $20 in materials.
69CudaFormulaS
Active Member
Hey, will one of these fit a 69?
1968FormulaS340
Well-Known Member
No, the hood is not a direct bolt on. If you are asking about the inserts, they are also not a bolt on for a 69 hood.
A 67-69 hood will bolt on a 69 but the body lines between the hood and header panel will be way off.
If you want a 67-68 hood on a 69, you also need to replace the header panel and grille assemblies with those from a 67-68.
If you want to dress up a 69 hood, I recommend the scoops and hood treatment from a 69 with the Cuda package.
Below is an example:
69CudaFormulaS
Active Member
Thanks for the info. Looking for a replacement 69 hood. They are tough to find.
1968FormulaS340
Well-Known Member
They shouldn't be that hard to find. The hood off of a 73+ Dart is the same.
Find a 73 Dart 4 door that's being parted and there is your hood.
bad440
everything,all the time..
theres one at pick n pull right now....View attachment Img_01287.jpg
- Status
-
