BB Cam wanted

[jeeper]

I am looking at getting a BB cam for my 440.

Something in the under .500 lift area. The .484 Mopar cam would be fine for what I am after.

Maybe a 274-474

or 284-484 type grind.

If it is used, I need to know that it is decent etc. Like anyone, I can't put a half used up cam in there. Something with a known history is good.

I am finally after months getting back to the car and have decided that I may need a more agressive cam.

I have some SB speed parts on hand, such as a .484 Mopar grind-300 miles, and a NIB 222-232 447-450 cam as well as other stuff.

Cash is a possibility as well.

I am in a bit of a hurry on this due to time constraints.

Here is my direct email: radjad(at) gotsky.com

Thank you, ROB

 

[68 Sedan]

I think I've got a .474 280 that was installed and never run

 

[jeeper]

LMK. Is that the Mopar Performance one?

ROB

 

[68 Sedan]

LMK? Guess you're talking to me...since I'm the only one to respond so far (D-OH!) Yeah, it's a MP cam. Hemi grind. Works super in a 383, but I've never run one in a 440.

 

[jeeper]

Yeah, I am talking to you. "Are you talking to me?" remember the line from the movies.

Is that a one bolt cam? I just bought a $55 timing set that is three.........

Otherwise I think that could be a decent cam for what I am doing.

ROB

 

[drgrcr3603]

i have a 509 purple shaft that is used ,the lifters are marked and put in the box as they were taken out ,also have a double roller timing chain ,60.00 for all ,cam is in real good shape ,ready to install

 

[74360duster]

I have a brand new .557 purple shaft cam. It was installed in my 14.1 440 and I decided to go to a .690 roller cam setup instead. This cam is new and was never run. i have it back in the box with the lifter and etc.. loctated in central missouri.

 

[68 Sedan]

Yeah....Taxi Driver:burnout: Travis Bickle

I'll have to look to see if it's a one or a three.