[SOLD] Big Block Flywheels

[RAT ROD AL]

I have 3 flywheels . I believe they are all Internal Balance. $75 each. + the ride from FL. 33956
PayPal

All are 11" , 143 tooth

#1
....SOLD....
This one may be for a 360.

#2
....sold...

#3

 

[moparmarks]

#1 is not for a 360.

 

[hansbuscher]

Magnum 5.9?

 

[moparmarks]

360 and 5.9 have 3 holes. 360 shown. 5.9 has a little smaller holes.
#1 is for 400 trucks.

 

[RAT ROD AL]

#1 is not for a 360.

@LO23M8B is the buyer, hope he chimes in soon.

 

[cudamark]

The top two look to be '67-9 B and C-body 383 and 440, '69-up D-series pickup/Ramcharger 318, and 383/400/440 with forged cranks. The bottom one looks like something aftermarket, for maybe the same application.

 

[moparmarks]

#1 with the fly cut looks like the wheels that I've found in 400 4-spd trucks 72-78.
#2 looks like it is for most internally balanced motors.

 

[cudamark]

A 400 in front of a manual transmission is internally balanced too. Same crank as a 383. There were no externally balanced 400's or 440's with a manual transmission.

 

[moparmarks]

A 400 in front of a manual transmission is internally balanced too. Same crank as a 383. There were no externally balanced 400's or 440's with a manual transmission.

Yes. What I'm saying is the only motor that I've seen with the fly cut wheel is the 400 and every 400 that I've owned with a 143t had the fly cut. Just what I've seen.

 

[RAT ROD AL]

1 left #3 flywheel $75 + shipping

 

[George Jets]

1 left #3 flywheel $75 + shipping

Looks like it has a real nice ring gear on it.