[FOR SALE] Big Block MP .620 solid camshadt + lifters

[Jeremiah (jd)]

Hello,

I have a used Mopar Performance .620 lift solid flat tappet camshaft and lifters. These parts were in an engine I purchased with what appears to be low run time. The lifter placement was preserved upon disassembly.

Asking $300 + shipping

 

[RustyRatRod]

@Bighead440

 

[Jim Ward]

Do you have the cam card for this grind to show duration @.50?

 

[Jim Ward]

Looks like big block? If so I’m not interested.

 

[Jeremiah (jd)]

Looks like big block? If so I’m not interested.

Doh! Yes sir this cam was removed from a 440.

 

[Jeremiah (jd)]

I do not have a cam card. I did measure the lobe lift to ID the cam. And.....it's purple

 

[MOPARMAGA]

The math used by Chrysler adds up to 275 at .050 but....others have measured them out in the mid 280s at .050

 

[Jeremiah (jd)]

The math used by Chrysler adds up to 275 at .050 but....others have measured them out in the mid 280s at .050

I am pretty sure there were multiple suppliers of the purple shaft line of cams over the years also. That alone could count for some variation. Bottom line is a person would be hard pressed to find a high lift mechanical camshaft and lifter set for 300 clams

 

[crackedback]

this one?

.620 mechanical Purple Shaft?

Will this cam work with my 383? 12-1 compression, 915 heads, Weiand Tunnel Ram, 4.11 gears, E85 conversion

www.forabodiesonly.com

 

[MOPARMAGA]

I am pretty sure there were multiple suppliers of the purple shaft line of cams over the years also. That alone could count for some variation. Bottom line is a person would be hard pressed to find a high lift mechanical camshaft and lifter set for 300 clams

Agreed