Body cart

[44o gts dart]

Hey guys any body have home made or bought, the 3 peaces that attach to body,, so I can move dart with out a drivetrain under it. I am looking for 2 that attach to front leaf spring 4 bolt plate and one that attaches to rear k member bolts … thanks in advance

 

[mbaird]

I made some out of scrap angl iron ang caster wheels

 

[mbaird]

Actually I mounted mine to the bumper bracket holes . That way I could install k- member and engine .

 

[44o gts dart]

Actually I mounted mine to the bumper bracket holes . That way I could install k- member and engine .

I rather lift where leaf springs mount,,,less flex in body

 

[mbaird]

I rather lift where leaf springs mount,,,less flex in body

I meant in front of… but using spring mounts is a good idea . But then it would be impossible to install rear end .

 

[Kendog 170]

I made this for the front of mine. I left the rearend in place until I was done with the body. Then removed it went through it on a stand then re-installed. Then picked up front and removed jig and rolled Engine, trans, suspension under.

 

[1MeanA]

Actually I mounted mine to the bumper bracket holes . That way I could install k- member and engine .

That is what I did. It has HD scaffolding wheels and they slide into round pipe.

I didn't build one for the back as I put the diff in and used tire dollies.