C cocuda New Member Joined Jun 5, 2005 Messages 3 Reaction score 0 Jun 6, 2005 #1 Any idea what the standard bolt pattern is on a 7.25 rearend. Seams stock on my 1967 barracuda , 273 auto 235hp car.
Any idea what the standard bolt pattern is on a 7.25 rearend. Seams stock on my 1967 barracuda , 273 auto 235hp car.
B BobK Custom Builder Joined Jun 6, 2005 Messages 121 Reaction score 19 Location Holly Springs, GA Jun 6, 2005 #2 cocuda said: Any idea what the standard bolt pattern is on a 7.25 rearend. Seams stock on my 1967 barracuda , 273 auto 235hp car. Click to expand... If it's on that car, and it's stock, it should be 5 on 4". Start a tape measure from the center of one lug to the center of another lug two lugs away (in other words, skip one lug), and you'll get the center spacing. Bob
cocuda said: Any idea what the standard bolt pattern is on a 7.25 rearend. Seams stock on my 1967 barracuda , 273 auto 235hp car. Click to expand... If it's on that car, and it's stock, it should be 5 on 4". Start a tape measure from the center of one lug to the center of another lug two lugs away (in other words, skip one lug), and you'll get the center spacing. Bob
dgc333 Well-Known Member Joined Jan 12, 2005 Messages 4,098 Reaction score 52 Location Pembroke, MA Jun 6, 2005 #3 The more accurate way to measure is from the center of one to the edge of a lug two lugs away. Also, note that there are 5 on 4 1/2" bolt pattern 7.25" rear ends that came on a-bodies 73 up that also had disk brakes.
The more accurate way to measure is from the center of one to the edge of a lug two lugs away. Also, note that there are 5 on 4 1/2" bolt pattern 7.25" rear ends that came on a-bodies 73 up that also had disk brakes.