Nov 21, 2016 #1 70scatpack FABO Gold Member FABO Gold Member Joined Oct 22, 2016 Messages 175 Reaction score 218 Location Hamburg,New York Looking for the bolt or screw size for gas filler neck to the quarter panel on a 70 dart?
Nov 22, 2016 #2 3 383Scampman Well-Known Member Joined Nov 24, 2013 Messages 1,827 Reaction score 1,060 Location New Hampshire It is either #6 or #8 x 1/2" long . I used stainless . If you want o.e. look you can dob some flat black on after install . I would try #6 first , if they go in loose then go to #8
It is either #6 or #8 x 1/2" long . I used stainless . If you want o.e. look you can dob some flat black on after install . I would try #6 first , if they go in loose then go to #8
Nov 22, 2016 #3 70scatpack FABO Gold Member FABO Gold Member Joined Oct 22, 2016 Messages 175 Reaction score 218 Location Hamburg,New York Thanks, for the info I will try that and let you know which one works