Borgeson - which port is pressure? which port return?

[JoesEdge]

I have my Borgeson installed. I'm ready to hook it up, but I don't know which port is pressure and which is return.

The port towards the rear of the car is what? pressure or return?

Thanks!

 

[67Dart273]

Which one is larger. Almost always is the return

 

[brian6pac]

If you go to the web site they have the instructions right there, Why guess.

 

[JoesEdge]

Which one is larger. Almost always is the return

I'll look at the fittings again. They seemed the same size. The one fitting I have is just a hose barb end to hook p the return hose. The other is an adapter fitting. At first glance they looked the same size, but I'll double check.

If you go to the web site they have the instructions right there, Why guess.

I tried that last night and I didn't have any luck (which is amazing because I'm in I.T. field which means I Google answers for a living), but I was tired. Been working on this project all weekend long (swapped out the K frame with a fully welded K frame and Borgeson box). I'll look again right now to see if I can find proper instructions.

Hah! So they do not have instructions for part number 800127 but I am guessing the 1 1/8" sector instructions would be the same. Yup!


Ok In case anyone else had this question.

The low pressure return line is the the port closest to the firewall.

Borgeson website only has the instructions for the smaller section but it should be the same for both.

Here's a link to the instuctions in case anyone else may need it:

http://borgeson.com/instructions/800126