brakes on my 63 dart

-
69DARTS

69DARTS

69 Darts Rule
Joined
Aug 5, 2008
Messages
10,039
Reaction score
500
Location
indiana
Ok I will be staying with drums front and rear
and small bolts pattern rims
what I want to do is go. With a
dual master cylinder.
So what master cylinder do I need to get
and do they make a line complete kit part #
And any other parts will I need
thank u
 
Casey, I was only letting him know that I had the parts he needed for the swap, and their prices.
For the record, you need a set of master cylinder lines and prop valve from any 1967-up car with drum brakes.
 
I would add this, mopar tandem master cylinders do not have residual check valves in them, w/ the exception of some 1 ton tks and vans. The reason they could do away with
them w/drum brakes was the use of the spring-loaded cup expanders inside the wheel cylinders. If you do not have the updated style of wheel cyl., they may seep, or take in
air and moisture, especially when they have been heated up good then cool down. I haven't checked the part no. differences from the break-over years when they made the MC
switch, but you need to get the "post switch" units if they are still making the "pre-switch" units sans the expanders.
 
You must log in or register to reply here.
-

Back
Top