bucket of bolts

[Sedanman]

This is a 5 gallon bucket of everything that was removeable from abodies when I parted them out. Let me know what your looking for,I'm sure I have it. I also have 2 more buckets full to dump out.

 

[grassy]

I really wish you were closer. It is really cool you are doing this.

Grassy

 

[4spdragtop]

Dump the other 2 buckets, lets see what ya got there:happy2:

 

['64 Cuda]

I need a spare tire hold down bolt, washer, & wing nut for an early A. Don't know if it's different than others. Also need battery hold down stuff for the same car.

 

[Sedanman]

I do have 2 hold down bolts with wing nuts

 

[4spdragtop]

Im lookin for the 2 clamps/brackets that hold front bumper on 69 cuda to the fenders

 

[Sedanman]

I'm keeping 1 of them

 

[Sedanman]

No 67-9 cuda brackets @ 4spd

 

[4spdragtop]

10-4

 

['64 Cuda]

I'm keeping 1 of them

What do you want for one?

 

[PapstXX]

It is really cool you are doing this.

i am prout of you

 

[340wedge1971]

Any wheel molding screws 73 swinger? Is that a factory valve cover wire holder?(2nd pic top middle)

 

[RedFish]

I need the little keyhole studs that hold the dash speaker support frame
Nuts for them would be nice too. I can get a pic of one if you aren't familiar with. Good luck.

 

[Sedanman]

To make it easier to see them,I took 6 pics from top to bottom of everything spread out. There are gauge cluster screws,fender bolts,arm rest screws,body shims,K frame bolts,bumper bracket bolts,steering box bolts,shock bolts,lugs,headliner bow clips,67-9 grill & dash screws & clips,windshield trim clips & screws,heater cable clips,heater box clips,rear shock washers,exhaust manifold dish washers,door strikers,carb return springs,body plugs,dash pad nuts,this is just to name a few that I can make out from the pics. If you want pics,send me your email & I will send them so you can blow them up. There is lots of hard to find stuff that is actually from the factory & not crap made in china.

 

[Sedanman]

it seemed to load them reversed. down is up & up is down

 

[Old Tired Rebel]

Do you have a V-8 throttle pedal/cable assy bracket for a early a?

 

[Sedanman]

nothing below 67,sorry

 

[Old Tired Rebel]

nothing below 67,sorry

Thanks , I thought I would ask.

 

[Sedanman]

Sale pending on 1 bucket

 

[Sedanman]

I put both buckets into 1 box which weighs #75 & is 14x14x8. Anyone want the whole box? $50 + ship from 60108

 

[Sedanman]

1 flat rate box is gone & pending on the other 1.

 

[Sedanman]

1 box left $47 shipped to your door.

 

[69wacuda]

I need a vent channel guide pin bolt that inserts into the bottom of the door for a 69 barracuda???? It's about 4"-6" long that slides into the bottom of the vent window channel.