Build Codes

[DartConvertible]

I've been trying to figure out my '68 Dart build sheet using decoders on line (and here). The VIN is easy, but the other codes aren't. The lines near the bottom with engine, axle etc. have numbers that I can't find.

thanks for any help

Peter

 

[crackedback]

I've been trying to figure out my '68 Dart build sheet using decoders on line (and here). The VIN is easy, but the other codes aren't. The lines near the bottom with engine, axle etc. have numbers that I can't find.

thanks for any help

Peter

Some of those numbers are the last two or three digits of an assembly line part number. Others are the codes that would be found on a fender tag.

You likely won't find a broadcast sheet decoder due to the required database. Think of all the part numbers that you would need to accomplish such a task.

 

[71DartGuy]

Try this and see if it helps

http://www.mopar1.us/build.html

 

[Mrmopartech]

When all else fails,go to : www.mymopar.com mrmopartech

 

[Alaskan_TA]

You can find some of them here;

http://www.hamtramck-historical.com...PocketGuides/1968/68_Dart_Pocket_Card0001.jpg

http://www.hamtramck-historical.com...PocketGuides/1968/68_Dart_Pocket_Card0002.jpg

http://www.hamtramck-historical.com...PocketGuides/1968/68_Dart_Pocket_Card0003.jpg

http://www.hamtramck-historical.com...PocketGuides/1968/68_Dart_Pocket_Card0004.jpg

 

[roosduster]

Try this and see if it helps

http://www.mopar1.us/build.html

Thanks for the link to that site, helped me answer a few questions I had about my Duster.

 

[DartConvertible]

thanks guys, those sites are helpful.