txbullets
Well-Known Member
Starting to buy parts for my 68' 340 to put into my 72 dart swinger and looking for guidance or suggestions.
Motor has x heads and not sure about the cam but the motor was built for stock class racing 10 years ago so guessing not much. (Ran very little and the guy put a 360 in. Been sitting indoors since) Standard 10.5/1 compression. I already acquired an Air Gapper intake.
Looking for suggestions on what to do with this thing. Cam, carb, headers, etc. I am not looking to go crazy here just good power for street with an occasional trip to the track.
Thanks in advance.
Motor has x heads and not sure about the cam but the motor was built for stock class racing 10 years ago so guessing not much. (Ran very little and the guy put a 360 in. Been sitting indoors since) Standard 10.5/1 compression. I already acquired an Air Gapper intake.
Looking for suggestions on what to do with this thing. Cam, carb, headers, etc. I am not looking to go crazy here just good power for street with an occasional trip to the track.
Thanks in advance.