cant get my driveshaft off!

[naus360scamp]

ok so im changing my rear end carrier and i cant seem to get the drive shaft to let go of the u joints? i took off the four bolts and it still wont separate can anybody help me and pictures would help alot alos. 727 to 489 case to 8.75 :sign3:

 

[krazykuda]

Keep stroking it, eventually it will come... :happy2:


Use a large screwdriver and wedge it out of the axle if it is stuck... :blackeye:

 

[72dart_swinger]

x2 on the screwdriver just pry on it and it will come off

 

[Dart_Doctor]

x3

 

[naus360scamp]

ok ill give that a shot next sat when i work on it again thanks!

 

[naus360scamp]

Keep stroking it, eventually it will come... :happy2:


Use a large screwdriver and wedge it out of the axle if it is stuck... :blackeye:

LMFAO:toothy8:

 

[cudamark]

Make sure the car won't move....either up on stands or wheels chocked....and put it in neutral. Pull the straps and use the pry bar as mentioned. If it's the yoke that is binding in the transmission extension housing, you'll need a new yoke, bushing, and seal too.