Carb Gasket & Intake

[2-66 Cudas]

Need a part # for the carb to intake gasket for a 600cfm Holley going onto an Edelbrock 318/360 dual plane intake from mid 70's 318. Prefer gasket with center rib - Holley lists a part # 108-18 for a model 4160 which shows a center rib - anyone familiar with this? I am also looking for a stock cast
383 4-bbl intake for a friend of mine!

 

[whitepunkonnitro]

I have a few different stock 383 intake manifolds...$50 each, plus the ride. PM me if you're interested

 

[oldkimmer]

.........What intake r u using...............kim..............

 

[metallidart]

What I have done before is take a razor blade to a 4-hole gasket to make what I need. I have never really noticed a difference between running a gasket with a center divider, a 4-hole gasket, and an open gasket. I think you would be fine running a 4-hole gasket.