[WANTED] Cast 360 4bbl intake

[Syleng1]

I’m looking for a 318 or 360 factory 4bbl intake. I need the one with the thermostat housing that is offset like the one shown in the picture ( I took from Fakebook.) This is the one used for the newer AC compressor mounting.

I’d go aluminum but they are so dang expensive. Also, I prefer to buy in person so Connecticut or Mass or Rhode Island locality is good because shipping would be expensive. PM me please.

 

[jazak5]

The '71 "2100" 340 intake is about as good as it gets and pops up from time to time

https://redirect.viglink.com/?forma...t=Mopar Small-Block Intake Manifold Flow Test

 

[68 bee]

I’m looking for a 318 or 360 factory 4bbl intake. I need the one with the thermostat housing that is offset like the one shown in the picture ( I took from Fakebook.) This is the one used for the newer AC compressor mounting.

I’d go aluminum but they are so dang expensive. Also, I prefer to buy in person so Connecticut or Mass or Rhode Island locality is good because shipping would be expensive. PM me please. View attachment 1716412984

I have this one in Long Island NY. $100

 

[Dartn440]

The '71 "2100" 340 intake is about as good as it gets and pops up from time to time

https://redirect.viglink.com/?format=go&jsonp=vglnk_174882216211211&key=508e022f256315a50e8e5af8c001704f&libId=mbebje6m0100037r000ULtt0dc88v9pvn&loc=https://www.forabodiesonly.com/mopar/threads/340-intake-manifold-casting-2531915-upgrade.536446/#post-1974229236&v=1&out=https://www.motortrend.com/news/mopar-small-block-intake-manifold-flow-test/&title=340 Intake Manifold Casting# 2531915 - Upgrade | For A Bodies Only Mopar Forum&txt=Mopar Small-Block Intake Manifold Flow Test

I might actually have one of those

 

[Syleng1]

I have this one in Long Island NY. $100

View attachment 1716413907

That’s the one I’m looking for but too far. I’m on the RI side of CT.

 

[68 bee]

I sent you a personal message

 

[Syleng1]

I sent you a personal message

Received