[SOLD] Cheap Compression For Your 318

-
Status
Not open for further replies.
whitepunkonnitro

whitepunkonnitro

Well-Known Member
Joined
Dec 6, 2011
Messages
14,798
Reaction score
878
Location
Murfreesboro Tn
Rating - 98.2%
162   3   0
Contact seller
Closed Chamber SB heads currently still bolted on a 1966 273. These are two year only heads that have both the standard LA intake bolt holes and closed combustion chambers. If you do a little research, many Stock Eliminator guys choose these castings over the Swirl Port 302's. If you've killed off all the bottom end of your 'teen by going a tad too big on the cam, these are just the ticket to get it back!
Engine was running and driving fine when I pulled it into the chop-shop..I'd rather not pull them until I have a serious buyer. Asking $200 plus the ride (Two USPS Boxes for $34). PM me if interested. Thanks FABO!
 
Chuck in a set of musical air horns and I might be interested.
 
Finally, a pic!

8718324555_a440e391eb_m.jpg


Aside from being utterly filthy, these head look solid. No sunken seats or signs or trauma. A quick freshen up will have these things ready to rock.
 
Status
Not open for further replies.
-

Back
Top