check lower control arm

[alex_borges_br]

Hi, I've made a search in FABO forum but unsuccessful.

How do I check if a lower control arm is ok..

for example, how should be the angle in the photo I attach.

Thanks in advance
Alex - from brazil

 

[RedFish]

I dont know how one would check it on the table.
The rubber in the strut rod bushings allow for some movement.
Adjustable strut rods will allow changing the measurements / alignment specs.

 

[alex_borges_br]

thanks..

I think that the lower control arms I have are a little bend. Hope it works

I dont know how one would check it on the table.
The rubber in the strut rod bushings allow for some movement.
Adjustable strut rods will allow changing the measurements / alignment specs.

 

[6pk2goDemon]

Looks okay to me. Those arms are very stout and hard to bend.