Chysler Carlisle 2026

[halifaxhops]

Here we go again , what are you bringing and where?

Halifax Hops P206-207 Distributors and Parts. Need something for me to bring PM Me.


Add yours and cut and past and add to make it a easier list!

 

[y2swinger69]

 

[rmchrgr]

I’m at spots N135-135. I’ll be there Thurs.-Sun.

I usually have a hodgepodge of new and used mechanical and performance parts but not much in the way of A body specific stuff. I will have a new AMD ‘70-‘71 Challenger quarter panel though that was slightly damaged during shipping. Gotta start getting it all together soon.

A guy in my town is asking me to bring some things down to sell this year that would definitely spark some interest but I won’t reveal what, you’ll just have to come by and look.

 

[Mr. Wolfie]

M170 =171

 

[Mr. Wolfie]

M170 =171

Not planing on vending this year.

 

[MR NOOM]

Here we go again , what are you bringing and where?

Halifax Hops P206-207 Distributors and Parts. Need something for me to bring PM Me.


Add yours and cut and past and add to make it a easier list!

 

[MR NOOM]

MR NOOM ,Here Im going to be at Carlysle Thursday till Sunday give me a call 973-919-1383 at the show a get to meet ?

 

[MR NOOM]

USMC 1970 1972 Paris Island, Head Quarters and Service Battalion 3RD Force Service Regiment Fleet Marine Force Pacific Okinawa Japan and Phil. Navy Yard

 

[gunbunny]

I'll be there selling locks & keys, and some other assorted items.
I'll be cutting keys on site as well.
My friend who sets up with me, will have a bunch of NOS, most likely B body items.
We'll be at E-4-6.

 

[halifaxhops]

MR NOOM ,Here Im going to be at Carlysle Thursday till Sunday give me a call 973-919-1383 at the show a get to meet ?

I am married to my spots unfortunately. Have shade and beer though.....

 

[halifaxhops]

Halifax Hops P206-207 Distributors and Parts. I wll bring a ECU tester also. Need something for me to bring PM Me.

rmchrgr I’m at spots N135-135. I’ll be there Thurs.-Sun​

I usually have a hodgepodge of new and used mechanical and performance parts but not much in the way of A body specific stuff. I will have a new AMD ‘70-‘71 Challenger quarter panel though that was slightly damaged during shipping. Gotta start getting it all together soon.

Gun Bunny We'll be at E-4-6.
I'll be there selling locks & keys, and some other assorted items.
I'll be cutting keys on site as well.
My friend who sets up with me, will have a bunch of NOS, most likely B body items.

Mr. Wolfie M170 =171

 

[davescuda]

My spots are N78 to N80 can’t bring everything what do you need? Send me a pm see if I have what you need.

 

[halifaxhops]

I will also have a ECU tester for me a Zetron that checks out the whole box.

 

[RPM440+6]

For those who will be attending Chryslers at Carlisle, Columbus Nats and Bowling Green we will be attending and vending as usual. We will be in our usual spots at Carlisle under the 3000 square foot tent in rows H and I in spaces 138 through 143. This is the row right below Building T.

As in previous years, we will have one of the largest and diverse display of reproduction parts on the grounds. I am in the process of placing my stocking inventory orders for the show and we are already getting calls and emails for items to be delivered to the event.

With that said, check with us for pricing and availability of your restoration parts needs. Preorders will get loaded so that the items will be tagged and invoiced so that you can simply drop by and pickup your order and enjoy the rest of the event without having to seek out those parts your searching for.

We bring a large assortment of product, but unfortunately, it is not possible to bring everything and items like carpet, we typically only bring black. So if there is special request for colors on carpet, head liners, sunvisors, package trays, etc, it is best to contact us so that we can meet your needs. If your needing AMD sheetmetal, then I would need to know by June 22nd so that the order can picked up and loaded out on a dedicated trailer for the show.

So for the items that we will be bringing, it will be ACC carpet and trunk mats; AMD sheetmetal; AMK hardware; Dale's Cuda Shop for louvers, exhaust tips and stripes(must preorder); FDC for wheel opening trim and body trim; Hoffman Winners Circle; Lectric Limited for date coded plug wires; Metro Rubber Products; M&H Wiring; Quirey Quality Design; REM for package trays, trunk mats, molded hood insulation; Soff Seal; Steele Rubber; SWR Products to list the bulk of the load. We do not bring any door panels, seat covers or internal engine components.

So if we can assist you in your reproduction parts needs, drop me a message so we can assist you in your search and needs. Even if you should not need anything, stop by our tent and take a break from the sun and walking. Always extra chairs and waters available to refresh yourself.

Thanks,
Richard O'Shields
Dale's Cuda Shop
Gary Goer Interiors
Quirey Qualtiy Design
Restoration Parts and Materials

 

[My70b]

I'll be there my van was picked to be in the adult toys display inside building T

 

[Mopar head]

in the adult toys display

? naah, I won`t go there. lol

 

[halifaxhops]

Any one need a spot or three in the swap meet area pm me a few friends cant make it.

 

[halifaxhops]

If anyone needs some odd ignition parts PM me and I will bring them. Just scaling down this year. I will also have a ECU tester with me to check them.

 

[rmchrgr]

I've made a list of most what I will be bringing to Carlisle next week sans pictures and prices. Condition is noted in the descriptions. If you're looking for something specific and don't see it listed, I don't have it. My vendor spot is N-136.

Most of what I sell is general mechanical/performance stuff. I really don't have any A body-specific parts to sell though I do have a few B and E body things from other projects.

If you have questions or want prices, PM me. I won't hold stuff unless it's paid for in full. Cash only, no trades.

EFI
Holley Sniper 2 PDM # 554-200 (new in box)
AR Engineering billet o-ring T-stat spacer with threaded temp. sensor bung #AR438 (good used)
Low Doller Motorsports 3 port remote sensor mount (new)

Electrical/ignition
Ron Francis Wiring "Bare Bonz" fuse block kit #BB55 (mock-up only)
Pioneer stereo system with head unit, 2 6x9 speakers & 1 dash speaker (used)
Derale PWM electric fan controller unit (mock-up only)
Mopar Performance chrome ignition box P4120534 (good used)
Mopar Performance canister coil with bracket P4876732 (good used)
Mopar Performance .8 ohm ballast resistor originally used with P4120889 Mopar/Accel Super Coil (good used)
Parts store electronic voltage regulator (good used)
Repro. '69-down mechanical voltage regulator (new)
Taylor aluminum battery box # TAY-48100 (mock up, has some extra bracket mounting holes drilled in one side)
MSD open barrel crimp dies # 3506 used with MSD crimp toolfor Packard 56 terminals (new)
Aftermarket electric vacuum pump with dash switch, wiring and transducer (used)
Repro '70-up (column mount) ignition switch (new)
Taylor 4 pole disconnect switch with mounting bracket #1033

E body
AMD '70-'71 Challenger driver's side quarter panel (new but has shipping damage)
'70-up repro Tuff wheel (some foam grip damage)
'71 Challenger tail panel with tail light lenses and emblem (used OE)

4 Speed
23 spline 4 speed throw out bearing assy. (new)
Hurst 4084 '68-'70 B body console shifter handle with new white ball (excellent used)

Auto. trans
Summit 904 cast aluminum deep trans pan with filter, extension, bolts and gasket # SME-1010

(mocked up, had fluid in it but never run)

Carburetor & fuel/air system
Summit #220106 4150 dual feed -AN carb. line, 800146 fuel pressure gauge and extra braided hose (good used)
Old school 4150 chrome dual feed line (used)
AED billet regulator bracket blue anodized #6093 (mock-up only)
Quick Fuel fuel pressure regulator # 30-803 (good used)
14" x 3" K&N air filter with chrome lid (used)
Allstar 4150 throttle linkage bracket black # ALL54225 (mock-up only)
Carter "Super Street" big block mechanical fuel pump # 6903 (good used)
Holley electric choke kit # 45-223 (mock up)
Holley vacuum secondary pod for adjustable springs #20-77
(used, cracked off manual choke bracket)

Engine parts
Pair of Edelbrock SB aluminum RPM head 'cores' #60779 - (used, damaged)
Flow Kooler SB aluminum water pump #1700 (mock-up only, outlet clocked and re-welded for fuel pump clearance)
Mopar Performance B engine forged crank balancer # 3830183 (used)
Summit "race" balancer # C4277 (used)
Pioneer "race" balancer # 872037 (used)
TTI 3.5" collector adapters, one with 02 sensor bung #RED35X35X9 (new)

Chassis parts
Matching pair of right and left '68 B Body "383" torsion bars # 776, 777 (used OE)
Metco A-body driveshaft loop kit # MDL1600 (new)

Interior parts
Year One Challenger "R/T" rubber floor mats # FMCH5DKG10 green (good used)
Kirkey 55-series seat floor mount brackets # 99214 (mock up)
'68 Coronet R/T door emblem - one year only # 2861182 (used OE)

- Greg

 

[str12-340]

Thanks for doing this, Ray! It allows me to print it out just before I leave and know where to find folks. No car this year, but I'm flying out to hunt parts, get ideas and appreciate the cars.

Mike Dawson
Vashon Island, Washington State

 

[tom999w]

Thanks for doing this, Ray! It allows me to print it out just before I leave and know where to find folks. No car this year, but I'm flying out to hunt parts, get ideas and appreciate the cars.

Mike Dawson
Vashon Island, Washington State

I was planning to go too, but with weather like this I've decided to stay home. Last year was 94 degrees and it was like walking through the bowels of hell, except with nice cars and car parts all around. It's 100 degrees there now...

 

[Howard1784]

Im looking for a conversion to a bow headliner kit for a 73 Duster. Or cardboard repop?

 

[Mr. Wolfie]

I was planning to go too, but with weather like this I've decided to stay home. Last year was 94 degrees and it was like walking through the bowels of hell, except with nice cars and car parts all around. It's 100 degrees there now...

View attachment 1716561802

This year's Forcast is for 80 degree temps. If that happens it may be the coldest show temp related in a long time

 

[halifaxhops]

Yes it should be like the AC settings in NYC!

 

[gtgto]

Although the weather I read leading up to the weekend sounded a lot better than what we experienced this weekend We stlil had a great time at Carlisle. I only bought wiper washer components and t shirts for me , my wife and son and a hat. Still saw some great cars and met a few awesome people, I seem to levitate to the ratty musclcars and saw a couple awesome 340 Dusters and Cud'a's that were ratty and driven to the show. Did anyone see the guy who had 14 inch Keystone Klassic's in 4" bolt pattern? I was wondering if he is on here and if he sold them or not.