Collection sell off.

-
Status
Not open for further replies.
Ghostrider 67

Ghostrider 67

Well-Known Member
Joined
Oct 25, 2015
Messages
117
Reaction score
76
Location
The Sticks, Vermont.
I'm putting this here for now as a heads up. I will disseminate all to the correct threads after I get the inventory organized more.

Okay, I have a friend who is selling off his tractor trailer full, 40 ft long, of blocks, heads, pistons, rods, etc. Plus everything in his shop including Sunnen hone, tire machine, industrial sandblast cabinet, parts washer cabinet, welding stuff, tools compressors, new gasket sets, etc. Lathe for drums and discs, Smith 100 compressor, dump truck.

The blocks and all in the trailer are already machined, and or bored decked aligned etc, greased and bagged. heads too are rebuilt completely and milled and bagged or boxed.

340, 360, 383, 440, slant 6's, all makes as well in all sizes. Including 428, 429, Boss 302, 289, 401, 455, 454, 396, 327, 350, 400. seriously folks, going cheap.
The inventory is numbered and corresponds to the boxes and bags which are also numbered. the inventory is some 30 pages of legal tablet single spaced...stay tuned and or PM me with your desires and I will see about it. Lots of 340/360 stuff...remember,all are already machined and ready to run, not rusted solid junk. looked in several bags and boxes, could not tell if it was new or redone.

EDIT::::::
There are 78 bare blocks. 15ea. 350 Chevy, 4ea. 400 Chevy, 1ea 400 Pontiac, 1ea. Chrysler 440, 2ea. Chevy 396, 5ea. Chrysler 360, 2ea. Chrysler 340, 7ea. Chrysler 318, 2ea. Ford 351 Windsor, 4ea. Ford 289/302?, 1ea. Pontiac 428, 2ea. Pontiac 301, 2ea. Olds 350 diesel, 1ea. Chevette 98, 1ea. Ford 200, 1ea. Chrysler 273, 1ea. Chevy 262, 1ea. Chevy 265, 1ea. Chevy 305, 3ea. Chevy 307, 2ea. Chevy 292, 2ea. Chevy 250, 1ea. Ford 250, 2ea. Chrysler 225, 1ea. Ford 240/300, 1ea. Continental 162, 1ea. Continental 227/240, 1ea. Ford 240/300, 2ea. Ford 2liter, 1ea. Ford 2.3ltr, 2ea. Chevy 153, 1ea. Chevy 2.5ltr, 1ea. Wisconsin THD motor.

EDIT::::::::::::::::::::::::::::::::::::::::::::
 
Last edited:
Knowing the VINs on the blocks would be awesome, just in case the cars they came from still exist.

Sounds like a major endeavor, best of luck!
 
Mods, feel free to move this to the sale section. It just covers so much territory I wanted to get the word out first... Busy, busy,,
 
post it up and let the money start coming in.....
 
d55dave said:
Does anyone know ghostrider 67? He looks like a fairly new member with few posts.
Click to expand...
I have been on FBBO since 2014 and am a Gold member. I don't normally spend much time on the other body types forums but, this collection of engines and parts is massive and covers all makes. So, it's appropriate to post it up in as many forums as I can for everyone to get a chance at these parts. Thanks!
 
d55dave said:
Thanks... just asking, as I am sure you know there have been a couple of scammers that came and went.

I look forward to seeing what you have.
Click to expand...
I understand, that's not me. I hope someone will buy the whole shebang but until then I intend to help him get this stuff moved. I just got this handed to me today so I am furiously trying to collate everything and get it digitized to be easier to manage. There is a ton of stuff not yet listed, from his shop and business right down to the envelopes...lol.
 
Ghostrider 67 said:
I understand, that's not me. I hope someone will buy the whole shebang but until then I intend to help him get this stuff moved. I just got this handed to me today so I am furiously trying to collate everything and get it digitized to be easier to manage. There is a ton of stuff not yet listed, from his shop and business right down to the envelopes...lol.
Click to expand...
My sister lives down state in Castleton. I'd like a list of the parts. I could pick up the parts I want and have a visit with my sister's family. Let me know. Thanks.
 
entire list as I was handed.

WP_20180509_13_12_35_Pro.jpg


WP_20180509_13_13_26_Pro.jpg


WP_20180509_13_13_39_Pro.jpg


WP_20180509_13_14_15_Pro.jpg


WP_20180509_13_14_26_Pro.jpg


WP_20180509_13_15_13_Pro.jpg


WP_20180509_13_15_31_Pro.jpg


WP_20180509_13_15_43_Pro.jpg


WP_20180509_13_15_53_Pro.jpg


WP_20180509_13_16_13_Pro.jpg
 
I didn`t read all these posts, but would be interested in the 400sbc, if u weren't so far away. Shipping is a deal killer now, the stupid bastards are costing themselves money !
 
famous bob said:
I didn`t read all these posts, but would be interested in the 400sbc, if u weren't so far away. Shipping is a deal killer now, the stupid bastards are costing themselves money !
Click to expand...
3PL at Fastenal is pretty reasonable. Around $250 or so. You would have $525 in it and have a block that's ready to be assembled.
 
Status
Not open for further replies.
-

Back
Top