Hi guys Im new here.
I just picked up a nice short block for a good price. I need to decide on what parts to finish it with.
The short block is a 372 cube small block. Its a 340 block with .070" 360 forged flat top pistons zero decked and a 3.58" crank.
The cam is a Mopar Perf. .590" solid ([email protected]")
with a 64cc head it will have 11.5:1 comp.
I'll be using an M-1 single plane and a set of Hooker super comp 1-3/4" headers
The car is a 3000lb Barracuda that I hope to have in the low 11s
What I need to decide on is heads, carb, gearing and converter.
The car will run on 28X10.5" slicks.
Any help would be great.
I just picked up a nice short block for a good price. I need to decide on what parts to finish it with.
The short block is a 372 cube small block. Its a 340 block with .070" 360 forged flat top pistons zero decked and a 3.58" crank.
The cam is a Mopar Perf. .590" solid ([email protected]")
with a 64cc head it will have 11.5:1 comp.
I'll be using an M-1 single plane and a set of Hooker super comp 1-3/4" headers
The car is a 3000lb Barracuda that I hope to have in the low 11s
What I need to decide on is heads, carb, gearing and converter.
The car will run on 28X10.5" slicks.
Any help would be great.