[FOR SALE] Compu-Tronix Distributorless Ignition System for Small Block Mopar

[redlinegw]

Here is a killer deal on a Compu-Tronix distributorless ignition system. I had this setup on my Valiant for years and it is great! Super easy to setup and you get that modern reliable coil pack setup! This sells new for $599 with plug wires so I am letting this go for $350 but you will need to do up a new set of plug wires. I am in Newhall CA. Check out their website at http://www.compu-tronix.com/DIS8.htm

<a href="http://s1230.photobucket.com/user/redlinegw/media/dis8_zps0057cc7e.jpg.html" target="_blank">

<a href="http://s1230.photobucket.com/user/redlinegw/media/dis81_zpsabb0b5c2.jpg.html" target="_blank">

<a href="http://s1230.photobucket.com/user/redlinegw/media/valiant1_zps60a11460.jpg.html" target="_blank">

 

[WEBBY]

Is this the one that you had on the Valiant or is this a new one. The wires are special or regular wires cut to length. Thanks Webby.

 

[redlinegw]

This is the one that has been on my Valiant for the past 5 years or so. It just takes regular cut to length wires. 4 60000 volt coils means your car will start instantly!

 

[68fsh]

Sounds good. Can I ask why your trying to sell?

 

[Sloan 1]

Me to?

 

[redlinegw]

I installed a Holley Terminator EFI system and the Compu Tronix system isn't setup to work with the Holley computer so I had to switch to an MSD digital 6. With the MSD the Holley EFI computer can now control the timing. With my Paxton Supercharger it is ideal so that the Holley computer can add or take away timing depending on boost. I would have kept the Compu-Tronix if it was compatible.

 

[redlinegw]

Bump for a killer ignition system!

 

[redlinegw]

Bump