Connecting a GM HEI module to the dizzy

[2-66 Cudas]

I have 2 diagrams from 2 different members showing conflicting information on this subject. One shows B going to the + side of the coil and C going to the - side. The question is with the W and G connections. I have a black wire coming from the distributor into a moulded plug to a female end and an orange wire into the same plug with a male end. This diagram does not designate what color to W or G. The other one, according to the ground location, has W to the - end and G to the + on the coil. B is going to the male C is going to the female on the distributor. CAN SOMEONE CLEAR THIS UP? I have everything mounted and wired, just need to know what plugs to what!!!

 

[67Dart273]

This is correct looking down at the top of the module. The distutor connector is hooked showing the bare male terminal of the connector as shown. I guess you know distributor pickup polarity is important as it affects rotor phasing

Or................