Cooling Idea! Ford SVT fan

[72ScampTramp]

I searched the web for an affordable set up to cool my BB. Though some other forms I came across this set up. The radiator is a 26" 2 row 1" core from JEGS. The fan is out of a 2000 Ford Contour V6. I didn't fit with the fan shroud in stock form. I had to trim the outer lip which gained me about 3/4" The center water pump pulley was really close to the center rib... But there is plenty of meat there to take out and still keep the structure.

 

[72ScampTramp]

The specs ive found for this seem to vary. But sitting between 3500-3800cfm and 30-40 amps.

 

[crackedback]

Find some button head socket bolts to hold you water pump pulley on...

http://www.mcmaster.com/#socket-head-cap-screws/=mpxx6c

 

[72ScampTramp]

Im guessing your saying I need more clearance?

 

[Abodybomber]

Run the same,on my small block. Trimmed down the shroulding,to clear the pulley. Tight fit,works nice.

 

[BigWhip]

Good information