[FOR SALE] Cragar 7/16” left and right hand thread nuts for sale new

[4mulas]

Not mine. About $3-3.50 each. New

https://www.summitracing.com/parts/crr-09005-4

https://www.summitracing.com/parts/crr-09004-4

 

[cudamark]

Interesting.....they're not like the originals, but, they say they fit the 5-4" wheels. The originals use an 11/16" socket whereas these use a 3/4" according to the spec sheet.

 

[4mulas]

Interesting.....they're not like the originals, but, they say they fit the 5-4" wheels. The originals use an 11/16" socket whereas these use a 3/4" according to the spec sheet.

That’s what the spec sheet says, but they are actually 11/16 hex. i just went through it all and complained to summit to get them to change the description. I guess they havent….

 

[Bennoel 10]

That’s what the spec sheet says, but they are actually 11/16 hex. i just went through it all and complained to summit to get them to change the description. I guess they havent….

Was gonna say 3/4 won't clear or will be somewhat difficult for a socket not to interfere with mag centre ??

 

[4mulas]

Was gonna say 3/4 won't clear or will be somewhat difficult for a socket not to interfere with mag centre ??

A 3/4" socket would fit fine. But it’s a moot point. If you have that wheel the only nuts that fits will have 11/16" hex as the only ones ever made for that application