Richie
Well-Known Member
Hi everybody:
Do many people still keep their 14 inch rims on after getting headers?
Do many people still keep their 14 inch rims on after getting headers?
D453 Dougs Headers & 14" rims
- Thread starter Richie
- Start date
-
plumkrazee70
Well-Known Member
Why would tire size matter? I had a set of Hooker headers now dougs, but haven't installed yet. I still have 14" Rallys
fratzog lover
Well-Known Member
I kept my white interior after installing a 268 cam.
Richie
Well-Known Member
Clearance I was thinking about. But that's what torsion bars are for I guess 
fratzog lover
Well-Known Member
I was just jokin. You tire size will have as much to do with clearance as the rims.
fratzog lover
Well-Known Member
BFGoodrich Radial T/A
Click on the specs. 205 vs 225 is over an inch. I took these off my car and put on some cheap factory size Kumhos cause I dont want too much traction, I like to squeal. There are still enough 14 inch sizes left you have alot of leeway.
Click on the specs. 205 vs 225 is over an inch. I took these off my car and put on some cheap factory size Kumhos cause I dont want too much traction, I like to squeal. There are still enough 14 inch sizes left you have alot of leeway.
Richie
Well-Known Member
Thanks..See that's what I mean...That's super helpful
Richie
Well-Known Member
The problem is probably solved then because I just checked and because this car has been sitting for years on these cheap firestones on the front witch will be changed as soon as the 340 goes in I never checked the numbers on them..."180/60"Thanks..See that's what I mean...That's super helpful
Last edited:
diymirage
HP@idle > hondaHP@redline
This I have to totally disagree with
I'm running N50-14s on my duster and once those are gone I don't know what to put on there, I don't think anyone makes a 14 inch tire that is up to the power I'm putting to it
(even the N50s need to be babied of the line or they will just go up in smoke)
-
