[SOLD] Dart rear air defrost

[Nite Moves]

I have a rear defrost/ Defog i believe....All in good condition. Fan spins freely. Was taken out of a 75 swinger. Placement was pass side speaker hole area. partial wiring included and bezel for dash. Bezel says rear air on it.Toggle switch is no good. Asking $40 plus shipping or best offer.

 

[Nite Moves]

I do have toggle switch and bezel..........Just found it.Hows $30 plus shipping???????????????????

 

[sdahmer]

Did you test it or was it working before?

 

[4spdragtop]

bump for ya eddie, good deal

 

[Nite Moves]

Did you test it or was it working before?

No not tested..........Not sure how?

 

[4spdragtop]

Hey Ed, here is a link to a schematic. Use a 6v lantern battery for power.

http://www.mymopar.com/downloads/1975/75DartB.jpg

 

[sdahmer]

Hey Ed, here is a link to a schematic. Use a 6v lantern battery for power.

http://www.mymopar.com/downloads/1975/75DartB.jpg

Does it run off 6v, not 12v?



Nite Moves, I'm very interested in it. It would just be nice if you could confirm that it works... How much to ship to 92021?

 

[4spdragtop]

Does it run off 6v, not 12v?



Nite Moves, I'm very interested in it. It would just be nice if you could confirm that it works... How much to ship to 92021?

Runs off 12V, but I use 6V for testing purposes so not to burn anything up.

 

[Nite Moves]

I took a pic of switch and bezel.......Will try and test tommorow.

 

[4spdragtop]

Hey Ed, dont worry bout using the switch for testing, I tested a spare rear defrost for dads 67 and it worked, I will revisit it Wed and get in touch with you.

Steve

 

[Nite Moves]

Thanks Steve........wanted to include a pic of switch........It goes with it and never posted one.......TTYL Edd

 

[4spdragtop]

Hey Ed, sorry for the delay bud!! Here are pics of my blower motor, I actually bought from you a while back. What I did was put 6v to it. The black wire I am holding I assumed was ground and hooked up the -ve to it. You can see the rusty connector, that is where I applied the 6v +ve to. The blower worked. Hope this helps.

Steve

 

[Nite Moves]

Well, it all works.............Finally had the time and remembered to do it. Heres a few pics of what you get.

 

[Nite Moves]

SOLD..................Thanks