Wyrmrider
Well-Known Member
remember not to put a too long bolt into the block and bust a cylinder
I would not fool with a cam on your driver but that voodoo wuld b a good choice
lots of threads on this
this is a great thread
sostart a new one on your 360 build
but I'd use the kb pistons with the squish deck or change the heads with an appropriate piston
get your compression fgured out b 4 cam
I would not fool with a cam on your driver but that voodoo wuld b a good choice
lots of threads on this
this is a great thread
sostart a new one on your 360 build
but I'd use the kb pistons with the squish deck or change the heads with an appropriate piston
get your compression fgured out b 4 cam
