PRH
Well-Known Member
Just a thread to burn up some winter minutes……..
I don’t know what brought these memories back, but I got a rush of them back of cars I’d either gotten to test drive, or was given a ride in.
These were all memories of disappointing rides, where it was difficult to contain the disappointment from the car owner.
I’ve had several like that………. Let’s start with this one:
About 1981/82, while I was in the AF in Sacto, ca.
One of the guys in my dorm has bought this cream puff of a 64/65 base model Mercury Comet…….white with a blue interior, 6cyl, 3 on the tree.
He immediately started acquiring parts to hot it up a bit.
289/4 speed, a laundry list of go fast stuff from SuperShops(headers, intake, carb, cam, dual point dist, etc.
Had the machine work done at a local performance engine shop(there were loads of them around), brought the whole shebang over to the base hobby shop and proceeded to assemble the engine, and stuff it all in the car.
Got it going, had a local exhaust shop make up some duals for it.
He seemed to feel like it was pretty hot, and appeared happy with it.
It sounded pretty mean with a fairly lumpy cam, although in all fairness I didn’t really know anything back then.
The way I remember it, Within a year of completion he got orders to go overseas, so he decided to sell it before shipping out.
So………. My first ride ever in it was a test drive.
I was sooooooo disappointed when I put my foot to the floor in anticipation of rowing thru the gears.
It took forever for each gear to get used up.
It wasn’t even a little bit hot……… it was just a dud.
The clapped out 70 Challenger stock 318-2bbl, 3 speed I’d had in HS would have crushed it.
That was a big let down.
Got a similar experience?
I don’t know what brought these memories back, but I got a rush of them back of cars I’d either gotten to test drive, or was given a ride in.
These were all memories of disappointing rides, where it was difficult to contain the disappointment from the car owner.
I’ve had several like that………. Let’s start with this one:
About 1981/82, while I was in the AF in Sacto, ca.
One of the guys in my dorm has bought this cream puff of a 64/65 base model Mercury Comet…….white with a blue interior, 6cyl, 3 on the tree.
He immediately started acquiring parts to hot it up a bit.
289/4 speed, a laundry list of go fast stuff from SuperShops(headers, intake, carb, cam, dual point dist, etc.
Had the machine work done at a local performance engine shop(there were loads of them around), brought the whole shebang over to the base hobby shop and proceeded to assemble the engine, and stuff it all in the car.
Got it going, had a local exhaust shop make up some duals for it.
He seemed to feel like it was pretty hot, and appeared happy with it.
It sounded pretty mean with a fairly lumpy cam, although in all fairness I didn’t really know anything back then.
The way I remember it, Within a year of completion he got orders to go overseas, so he decided to sell it before shipping out.
So………. My first ride ever in it was a test drive.
I was sooooooo disappointed when I put my foot to the floor in anticipation of rowing thru the gears.
It took forever for each gear to get used up.
It wasn’t even a little bit hot……… it was just a dud.
The clapped out 70 Challenger stock 318-2bbl, 3 speed I’d had in HS would have crushed it.
That was a big let down.
Got a similar experience?















