Disc Brake change over

[dialysis07]

I have a 72 swinger with drums around. I also have a 74 swinger w/front discs. I want to put the entire K frame and brake assemblies under my dart. Does anybody see any problems with this action.

 

[RedFish]

thats the best way to do it. Move every dang thang LOL
Good luck

 

[2 Darts]

I have a 72 swinger with drums around. I also have a 74 swinger w/front discs. I want to put the entire K frame and brake assemblies under my dart. Does anybody see any problems with this action.

No problems. I dropped the fully assembled /6 K-frame out of the bottom of the Demon and rolled a complete 75 K-frame with V8 back in. With the V8 all ready to go and two dollys (one for /6 the other for the V8 ), I accomplished the swap in twenty minutes flying solo. 8) It was another day before I got all the shocks, steering, brakes, and engine wiring back in working order. Have fun!

Please remember to install the master cylinder and proportioning valve from the disk brake car if you haven't already.

 

[charger70]

Does anybody see any problems with this action.

Only if one is a /6 and the other is a V8 and you want to keep the original 72 motor.