I'm putting 73 dart sport disc brakes in a 71 swinger . Everything is done except the flex brake lines. The swinger brake line mount on the frame is round with a flat on it. The one on the sport is a hex. Do mopar make a brake line with a thou bolt hole mount to the caliper to a round with a flat frame mount to the frame? What year would that be? thanks everyone
disc brake lines
- Thread starter sorewrist1
- Start date
-
Waco Demon
Well-Known Member
I used a square file and turned the round hole into a hex hole on my 72 Demon
grumpuscreature
Resident Curmudgeon
Try a Bendix 88612. Looks like it may work for you...
67Dart273
Well-Known Member
Unrelated............
you might consider swapping the hardware and calipers side for side and mounting them to the REAR of the spindle. This provides better clearance for "some" anti-sway bars
But if you do that, you'll want Volare (I believe) hoses.
you might consider swapping the hardware and calipers side for side and mounting them to the REAR of the spindle. This provides better clearance for "some" anti-sway bars
But if you do that, you'll want Volare (I believe) hoses.
-
