Dustman73 Well-Known Member Joined Oct 24, 2010 Messages 201 Reaction score 1 Location Farmersville, Ca Oct 5, 2011 #1 How should studs on disk brakes be removed?
pettybludart Well-Known Member Joined Jul 18, 2008 Messages 15,311 Reaction score 290 Location Ontario,Canada Oct 5, 2011 #2 Remove the disc from the spindle,thread a nut on til flush with the stud.Then whack it with a big hammer,should pop out.
Remove the disc from the spindle,thread a nut on til flush with the stud.Then whack it with a big hammer,should pop out.
pntastar69 Well-Known Member Joined Dec 28, 2006 Messages 1,660 Reaction score 374 Location Gilbertsville, PA Oct 6, 2011 #3 What he said but I'd use a brass drift between the nut and BFH.
sdahmer Well-Known Member Joined Mar 9, 2011 Messages 289 Reaction score 17 Location San Diego Oct 7, 2011 #4 pettybludart said: Remove the disc from the spindle,thread a nut on til flush with the stud.Then whack it with a big hammer,should pop out. Click to expand... +1 or use a press if you have access to one.
pettybludart said: Remove the disc from the spindle,thread a nut on til flush with the stud.Then whack it with a big hammer,should pop out. Click to expand... +1 or use a press if you have access to one.