K kittypancake Well-Known Member Joined Feb 3, 2011 Messages 623 Reaction score 15 Location ct May 9, 2015 #1 I am wondering if the little notches on the upper control arm bushings need to installed in a specific manner. I can't see any reason why it should, but I thought I would check it our prior to installing them.
I am wondering if the little notches on the upper control arm bushings need to installed in a specific manner. I can't see any reason why it should, but I thought I would check it our prior to installing them.
J Jim Lusk Well-Known Member Joined Mar 8, 2006 Messages 6,246 Reaction score 3,200 Location Fresno, CA May 9, 2015 #2 Nope.
M MileHighDart Well-Known Member Joined Jun 3, 2004 Messages 4,748 Reaction score 6,019 Location Lakeview, OR May 9, 2015 #3 Jim is right, no orientation is necessary.
K kittypancake Well-Known Member Joined Feb 3, 2011 Messages 623 Reaction score 15 Location ct May 9, 2015 #4 Thanks