Drive line

[Dart 72]

Good day
Question, the drive line centre line is offset to passenger side on A body , Does any one know how much

 

[George Jets]

Can measure the flange hanging down at the rocker panel to the center of the trans tail shaft slip yoke for the left and right sides.

Centerline would be overall length from rocker to rocker divided by 2.

☆☆☆☆☆

 

[Dart 72]

Thanks for the reply
I will give it a try now the 383 is in with ear mounts it needs to move over so maybe the tail stock not be accurate, I will measure to the differential instead you think

 

[33IMP]

Depending on which rearend you have, pinion might be offset too. I'd measure at the trans tailshaft, as above.

 

[Daves69]

..............

Footnote #39

 

[Dart 72]

Give it ago
Thanks for replying

 

[HemiSSDart]

3" on a B-Body, I think it was 2-1/2" on an 67-76 A-Body no matter what engine/trans...