drivers side lower control arm swaybar bracket needed

[wolfp61]

I finally hunted down the correct front swaybar for my 66 cuda, that done I now need to mount it and do not have a bracket for it on the drivers side lower control arm. A trashed lower control arm would be fine even preferable if the bracket is intact. That way I can cut it off and weld it up without having to take the front end apart again.
TIA, Lew Wallace

 

[slickchick]

W O W :blob:

 

[cudamark]

Welcome to FABO! You picked a fairly tough one for your first post. The exact bracket only came on '65 and '66 models. You can use the '67-72 one also but it looks slightly different. The only thing I have is a whole control arm for the '67-72 models.
Thanks, Mark

 

[wolfp61]

Thanks for the info. I will continue the hunt for the correct mount but may get back to you if my search fails and I can cobb up a bracket off one of yours'. As usual I have too many irons in the fire, and am new to this social networking thing.