Rick Wellman
Well-Known Member
is there 2 different sizes of yokes for an 833 and an 833OD transmission.
Driveshaft yokes
- Thread starter Rick Wellman
- Start date
-
Rick Wellman
Well-Known Member
Dis regard the question. I found the answer. Thanks
For others who might have the same issue, what was the answer.
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 24,929
- Reaction score
- 12,278
Yes
the /6s have 904 sized yokes and the 318 ups are 727 sized. The mainshafts are also bigger on the V8s.
And the guts are all different too, except the low gear.
My 318 shredded a slanty input gear. The ratios are very similar between them, except the overdrives; one is .71, while the other is .73, and I don't recall which is which. I'm guessing the slanty is .71, cuz I'm guessing that's the one I shredded.
the /6s have 904 sized yokes and the 318 ups are 727 sized. The mainshafts are also bigger on the V8s.
And the guts are all different too, except the low gear.
My 318 shredded a slanty input gear. The ratios are very similar between them, except the overdrives; one is .71, while the other is .73, and I don't recall which is which. I'm guessing the slanty is .71, cuz I'm guessing that's the one I shredded.
Last edited:
-
