[FOR SALE] Dyno Simulator Printouts

Other Stuff For Sale or Wanted

Thread Status:
Not open for further replies.
  1. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    Contact Seller
    I have had an influx of requests for Desktop Dyno numbers. I would like to provide to those who do not have any programs. I will "build" you a simulated dyno run for your engine combination. I can get pretty close with this the more information I have from you. I can even input cylinder head air flow information from your flow sheets if you have them, but the program's default for cylinder head porting is pretty good.

    Things have been rough for Kitty and I the past year or two. If yall will help us, I will help you. I think this is a fair deal for those who might not want to spend 50 or more bucks on a dyno simulator program.

    So here's the deal. For $9.95 mailed to you I will send you a printout of your engine combo. This includes several pages of information, including horse power and torque graphs, charts and all of your particular engine specs that the program is capable of inputting. Remember, paper, ink, electricity and postage ain't cheap. What you will receive is well worth what I am asking. I will do a print out and post a picture of how many pages it includes shortly. Pleas PM me if you are interested. Thanks.
     
  2. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    Here is what you will get. From left to right. Engine specs, cylinder head flow data, calculated power and engine pressures, manifold pressure and volumetric efficiency, and horse power and torque curves. That's five pages total with a lot of information about your specific build.
     

    Attached Files:

  3. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    Here are some of the inputs that I need from you.

    All the general stuff. Bore, stroke, compression, camshaft type and specs, intake and carburetor type, headers or manifolds (I can even in put for HP manifolds and large or small tube headers open or muffled exhaust), valve sizes, cylinder head flow data (or whether the heads are ported if you don't have flow sheets). That's pretty much it. I also have inputs for nitrous, superchargers and turbochargers. A lot of people scoff at the program, but I like it and think it is very accurate. The more information you put into it, the more accurate information comes out.
     
  4. SGBARRACUDA

    SGBARRACUDA ROY FABO Gold Member

    Messages:
    16,689
    Likes Received:
    5468
    Joined:
    Dec 7, 2006
    Location:
    PLANT CITY FL. and PERRY GA.
    Local Time:
    11:09 AM
    PM sent
     
  5. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    PM returned sir. Roy brought up a good point. Some of you might want to make comparisons between different engine components on an engine, or maybe do more than one engine. I can do that and will offer a discounted rate instead of 9.95 each. I will do two combinations for 12.95 and three different combinations, for example, for 15.95. Just let me know. Thanks.
     
  6. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    BUMP! I now have the ability to send these as a PDF file in an email so I can send you something very quickly.
     
  7. 69conv

    69conv error 401 FABO Gold Member

    Messages:
    3,369
    Likes Received:
    4442
    Joined:
    Jan 27, 2013
    Location:
    Motor City
    Local Time:
    10:09 AM
    PM sent.
     
  8. RustyRatRod

    RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

    Messages:
    60,705
    Likes Received:
    32365
    Joined:
    Jun 7, 2010
    Location:
    Georgia
    Local Time:
    11:09 AM
    Thank all of yall for taking advantage of this! Every little bit helps.
     
    • Like Like x 1
    • 69conv

      69conv error 401 FABO Gold Member

      Messages:
      3,369
      Likes Received:
      4442
      Joined:
      Jan 27, 2013
      Location:
      Motor City
      Local Time:
      10:09 AM
      YOU THE MAN! Just received my build dyno. Tons of useful info besides HP and TQ. Got head flo, manifold pressure, efficiency % and more. Even got priceless help on improving my build. Best $ I've spent on my car.
       
    • RustyRatRod

      RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

      Messages:
      60,705
      Likes Received:
      32365
      Joined:
      Jun 7, 2010
      Location:
      Georgia
      Local Time:
      11:09 AM
      Thanks Wayne. It is much appreciated.
       
    • Cruzin

      Cruzin Well-Known Member

      Messages:
      340
      Likes Received:
      23
      Joined:
      Apr 6, 2013
      Location:
      Florida
      Local Time:
      11:09 AM
      PM Sent.
       
    • MOPARMITCH

      MOPARMITCH Mekong Gold Member FABO Gold Member

      Messages:
      20,729
      Likes Received:
      11387
      Joined:
      May 15, 2013
      Location:
      Maryland
      Local Time:
      11:09 AM
      PM sent
       
    • 1972DusterPaul

      1972DusterPaul Well-Known Member

      Messages:
      999
      Likes Received:
      41
      Joined:
      Jun 29, 2010
      Location:
      Northville (Southeast) Michigan
      Local Time:
      11:09 AM
      PMed.
       
    • RustyRatRod

      RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

      Messages:
      60,705
      Likes Received:
      32365
      Joined:
      Jun 7, 2010
      Location:
      Georgia
      Local Time:
      11:09 AM
      Thank yall so much for taking advantage of this. Every little bit helps and Kitty and I really appreciate it.
       
    • txstang84

      txstang84 Well-Known Member

      Messages:
      4,490
      Likes Received:
      445
      Joined:
      Oct 10, 2011
      Location:
      Abilene, TX
      Local Time:
      5:09 AM
      PM on the way
       
    • adiffrentcity

      adiffrentcity Bent Rodder

      Messages:
      304
      Likes Received:
      12
      Joined:
      Feb 17, 2013
      Location:
      Smyrna TN
      Local Time:
      10:09 AM
      What's your preferred method of payment?
       
    • RustyRatRod

      RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

      Messages:
      60,705
      Likes Received:
      32365
      Joined:
      Jun 7, 2010
      Location:
      Georgia
      Local Time:
      11:09 AM
      Paypal is fine.
       
      • Like Like x 2
      • swinger340

        swinger340 Well-Known Member

        Messages:
        2,272
        Likes Received:
        45
        Joined:
        Jul 25, 2010
        Location:
        Maine
        Local Time:
        11:09 AM
        Very good and cool info. The #s appear to be VERY VERY accurate. My #s came up almost exactly where the engine builder I worked with on my complete 416 build told me I would be.
         
        • Like Like x 1
        • MR4V

          MR4V Well-Known Member

          Messages:
          378
          Likes Received:
          28
          Joined:
          Oct 22, 2009
          Location:
          Brisbane Australia
          Local Time:
          10:09 AM
          Thanks Rob, this has helped me out and saved big coin.
           
        • 75slant6

          75slant6 Well-Known Member

          Messages:
          5,358
          Likes Received:
          1834
          Joined:
          May 15, 2011
          Location:
          Russellville, ky
          Local Time:
          10:09 AM
          Hmm. Ig I won't be able to do this till I build my engine as the only thing I know about this engine is its a 318 with a 340 Torker single plane intake, eddy 650 and headers. Don't know a thing more about it. I'm guessing stock but Idk.

          But I will DEFINITELY be getting ahold of you once the time comes!!
           
        • Bill Dedman

          Bill Dedman bill dedman Legendary Member

          Messages:
          4,006
          Likes Received:
          59
          Joined:
          Oct 16, 2007
          Location:
          Conway, Arkansas
          Local Time:
          9:09 AM
          Does your program include results for forced induction numbers, such as HP and TQ figures for 10, 15, 20 or even 30 pounds of boost, and if there is an alky chemical injector into the charge, is there any way to account for that?

          Thanks for any info...
           
        • RustyRatRod

          RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

          Messages:
          60,705
          Likes Received:
          32365
          Joined:
          Jun 7, 2010
          Location:
          Georgia
          Local Time:
          11:09 AM
          Yup. On all counts.
           
        • grassy

          grassy Well-Known Member

          Messages:
          5,481
          Likes Received:
          62
          Joined:
          Aug 20, 2009
          Location:
          Nova Scotia
          Local Time:
          12:09 PM
          subscribed
           
        • Bill Dedman

          Bill Dedman bill dedman Legendary Member

          Messages:
          4,006
          Likes Received:
          59
          Joined:
          Oct 16, 2007
          Location:
          Conway, Arkansas
          Local Time:
          9:09 AM
          I'd like to get three of the dyno sheets; one describing the output at ten pounds if boost, and one each, at fifteen, and twenty-five pounds of boost.

          Reply to me at Billdedman@Hotmail.com and I'll send you the specifics.

          Thanks much!
           
        • RustyRatRod

          RustyRatRod Bla de blizhibliz de blatde blizi bla bla FABO Gold Member

          Messages:
          60,705
          Likes Received:
          32365
          Joined:
          Jun 7, 2010
          Location:
          Georgia
          Local Time:
          11:09 AM
          Email sent.
           
        Thread Status:
        Not open for further replies.
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.