[Found!] Early A slant six bell housing

[Princess Valiant]

I am looking for a bell housing in good shape with the casting number 2463027 OR 2468433 both casting numbers are 64 or 65 applications with the 4.3 inch bearing retainer hole.

I prefer to pay with paypal and shipping is to 81006

Thanks FABO

 

[Lee Robinson]

I am looking for a bell housing in good shape with the casting number 2463027 OR 2468433 both casting numbers are 64 or 65 applications with the 4.3 inch bearing retainer hole.

I prefer to pay with paypal and shipping is to 81006

Thanks FABO

PM sent.

 

[Princess Valiant]

PM sent.

thanks for the reply but I do not think that one will work. Thanks

 

[justme]

i have a 3spd bell housing with fork and i have a 4spd od bell housing, both in good shape

 

[Alaskan_TA]

So the early cast iron versions then. I will do some asking around.

 

[luis9995]

I am looking for a bell housing in good shape with the casting number 2463027 OR 2468433 both casting numbers are 64 or 65 applications with the 4.3 inch bearing retainer hole.

I prefer to pay with paypal and shipping is to 81006

Thanks FABO

I have a 64/65 4spd with bell housing. Have not checked part number since it's bolted on but for a good offer I wouldn't mind selling it seperately

 

[Valiant63]

How in a hurry are you? I have several from 63 or 65 Valiant stashed up north. Too cold up there for me yet.

 

[Moparlouie]

I have a 65, let me check #s