I saved these pipes that were installed on a 65 Barracuda with stock manifolds as I was intending to use them on my 65 Dart wagon. They are very solid pipes with surface rust that was I was going to remove Before installing them. What was good about these was the passenger side tucked up really nice against the transmission crossmember without the crossmember being modified. I will not ship; they must be picked up at my location Strasburg VA. I might consider meeting partway within 100 miles for gas money. If no takers after a reasonable time, they’re going for scrap.
Driver’s side on the left
driver side now on the right
passenger side on the botton with the pipe “adjusted” for clearance for the transmission crossmember
Driver’s side on the left
driver side now on the right
passenger side on the botton with the pipe “adjusted” for clearance for the transmission crossmember
